GasAlert Extreme Detector Configurations
|
Part Number |
Meter Configuration |
Resolution |
GAXT-H-DL |
Hydrogen sulfide (H2S) with yellow housing |
0-100 ppm |
GAXT-H-2-DL |
Hydrogen sulfide (H2S) extended range with yellow housing |
0-500 ppm |
GAXT-M-DL |
Carbon monoxide (CO) with yellow housing |
0-1000 ppm |
GAXT-M2-DL |
Carbon monoxide (CO) H2 resistant with yellow housing |
0-1000 ppm |
GAXT-X-DL-2 |
Oxygen (O2) with yellow housing |
0-30.0% |
GAXT-S-DL |
Sulfur dioxide (SO2) with yellow housing |
0-100 ppm |
GAXT-C-DL |
Chlorine (Cl2) with yellow housing |
0-50.0 ppm |
GAXT-Z-DL |
Hydrogen cyanide (HCN) with yellow housing |
0-30.0 ppm |
GAXT-D-DL |
Nitrogen dioxide (NO2) with yellow housing |
0-99.9 ppm |
GAXT-A-DL |
Ammonia (NH3) with yellow housing |
0-100 ppm |
GAXT-A2-DL |
Ammonia (NH3) extended range with yellow housing |
0-400 ppm |
GAXT-P-DL |
Phosphine (PH3) with yellow housing |
0-5.0 ppm |
GAXT-G-DL |
Ozone (O3) with yellow housing |
0-1 ppm |
GAXT-E-DL |
Ethylene oxide (ETO) with yellow housing |
0-100 ppm |
GAXT-N-DL |
Nitric oxide (NO) with yellow housing |
0-250 ppm |
GAXT-V-DL |
Chlorine dioxide (ClO2) with yellow housing |
0-1 ppm |
For Black housing change the "Y" to "B" |
|
GasAlert Extreme Detector Accessories
|
GA-TC-1 |
Test cap and hose (1 ft. / 0.3 m) |
GA24-BALERT |
Concussion-proof boot with stainless steel alligator-style clip |
GA-BSPLASH-K |
Splash guard filters, kit of 5 for use with concussion-proof boot (GA24-BALERT) |
GA-HC-1 |
Hard hat clip (non-conductive) |
GA-AG-1 |
Alligator-style clip (non-conductive) |
GA-NS-1 |
Neck strap with safety release |
GA-LY-1 |
Short strap (6 in. / 15.2 cm) |
GA-ES-1 |
Extension strap (4 ft. / 1.2 m) |
GA-USB2 |
IR datalink USB adaptor |
GA-CH-2 |
Chest harness |
SPAK-CC1 |
Hard-sided Carrying Case for motorized sampling pump and/or the detector |
GA-SPAK |
SamplerPak motorized sampling pack kit - SamplerPak arrives ready to use with Sampler motorized pump, coiled connector tubing for detector/pump, sampling tubes with barbed fitting, batteries, sampling probe, manual, multi-language CD manual and a convenient hard-sided carrying case with room for a detector.
Note: SamplerPak is not compatible with O3, ETO, ClO2, HCN or Cl2. |
GA-AS02 |
Manual aspirator pump kit with probe (1 ft. / 0.3 m) |
|
MicroDock II Test & Calibration Stations
|
DOCK2-2-1D-00-G |
MicroDock II automatic test and calibration system base station and GasAlert Extreme docking module (bump only for chlorine dioxide (ClO2) and ozone (O3)) |
DOCK2-0-1D-00-G |
GasAlert Extreme MicroDock II docking module - Note: Not compatible with chlorine dioxide (ClO2) or ozone (O3) gases. |
Note: Puchase (1) station and can use up to 6 docking modules per station
|
For complete MicroDock II system configuration information, contact us
The MicroDock II is an easy, cost-effective way to bump-test, calibrate, charge and manage records for BW portable gas detectors. Used with Fleet Manager II software, download information faster than ever from the MicroDock II to create reports, print receipts of calibration, sort and graph data, archive information and manage your fleet of detectors
|